AbsorBag® is a patented solution, based on the proven ability of calcium chloride to aggressively remove moisture from the air. Easily installed on the container lashing ring by hanging it with the provided hook.
AbsorBag starts working when removed from its sealed packaging. Then the desiccant material gradually dissolves into a brine. The absorbed moisture is trapped and will not re-evaporate back into the air.
- Long shipments
- All type of cargo
- Journeys with colder temperatures
- High capacity, fewer units needed
- Easy to use
- No re-evaporation of absorbed moisture
- Long-lasting effect
- No loss of cargo space
Can be used for any type of cargo with at least 10 cm space between cargo and the AbsorBag. Or for cargo not loaded higher than 1.5 meters from the floor. Absorbing agent is calcium chloride (CaCl2).
Absortech’s products are intended for single-use. Calcium chloride is an eye irritating substance and its disposal will depend on the local disposal regulations. The clamps can be removed and recycled. Polyethylene (PE) and polypropylene (PP) plastics are recyclable.
Suitable cargo guidelines
This is only a general dimensioning recommendation. The quantity needed is depending on shipment time, climatic conditions, cargo type etc. Get a precise recommendation through our dimensioning service, AbsorDim™. Contact us for consultation!